Recycling of materials has increased demolition operations. However, if on the one hand the demolitions favor the environment, on the other they create dangerous dust. For zero impact demolitions it is necessary to use suitable dust suppression systems. Best wheel washing station

Recycling in construction: it's good for the environment and for your company

The importance of recycling in construction has finally been understood and recycling is the main reason why demolitions have had a significant boost in recent years.

Demolishing a building to build a new one in its place is the optimal and necessary solution to contain land consumption (avoiding the exploitation of green areas), to promote building redevelopment and urban regeneration.

Another advantage of building recycling consists in the fact that reusing waste is also convenient, because everything that is reused also becomes a real source of income (as happens for the ferrous waste we talked about in this article).

Recycling is therefore convenient on several fronts, both for the environment and for the budget.

Demolition and dust

However, if on the one hand the disposal of old buildings is beneficial for the environment, on the other it creates a further problem: dust.

Each demolition operation generates dusts of different granulometry, which are dangerous for various reasons (especially in summer, as we have seen here):

For the health of the operators: dust could cause serious damage to the respiratory system if inhaled, or compromise vision if it comes into contact with the eyes of the operators

For the health and livability of people who live or work in structures adjacent to the demolition site

For visibility on site: without adequate visibility, production decreases and the time to complete the work lengthens

For machinery: dust is a concrete enemy for the proper functioning of construction site machinery, it reduces their average life and subject them to stresses that favor their wear

Zero impact demolition: dust suppression systems

To overcome this problem, dust suppression systems are a solution that is as practical as it is effective: these are systems that atomise water around the processing space. The nebulized water simply weighs down the dust particles (of different granularity), causing them to fall to the ground. wheel washers machine

However, it is necessary to choose the most suitable system for the single process and for the spaces, open or closed. In case you talk about

demolition

drilling

mobile and fixed crushing

the recommended dust suppression systems are integrated into a host machine (they are not independent structures such as cannons for dust control).

Zero impact demolition: Tecnoter smart spray and mobile part filter

Tecnoter’s dust reduction systems for demolition are absolutely revolutionary in terms of technology and fields of application.

For example, perfect for drilling, when in the tunnel the presence of dusty residues dispersed in the air generates considerable risks for the health of workers and significant reductions in the profitability of the project, the “mobile wall filter” generated by the Tecnoter dust reduction system ensures excellent results in terms of economical use and adaptability to the perforated material.

The adoption of the Tecnoter dust reduction system on a mobile crushing system, on the other hand, with the use of an external tank of only 500 liters and the adoption of the “smart spray” operating mode allows total autonomy of the crusher for several days and exceptionally low water consumption. hydraulic magnets

These systems make demolitions zero impact, guaranteeing safety for operators, continuity for work, reduced water consumption and an important help for the planet.

The purpose of Tecnoter’s engineering study is to design solutions that can concretely solve the problems of the construction site deriving from the generation of dust, promoting visibility, health, environmental abatement and the performance of the construction site itself.