How should stone cutting machines be maintained? It's important to remember these:
1. Check the stone cutting machine cable frequently. If damaged, it must be bandaged or replaced immediately to prevent leakage.
2. Regularly clean the moisture and dust on the stone cutting machine to keep the equipment clean.
3. When performing stone cutting machine cutting operations, attention should be paid to the waterproofing of the heat dissipation port of the main motor to prevent cooling water from entering the main motor through the heat dissipation port and causing a short circuit.
4. Stone cutting machine operators must add lubricating oil to each lubrication point of the equipment every day.
5. Clean the guide rails and the middle feeding roller frequently and apply grease to prevent corrosion.
6. The dirt on the equipment should be cleaned promptly after each sawing operation, and the equipment should be thoroughly cleaned once a week to prevent dirt from corroding the equipment.
7. Be careful not to pull on the cables when moving the console. The operating platform should be placed in a rainproof place.
8. During the cutting process, if there are any abnormal sounds or phenomena, stop the machine immediately for inspection. It is recommended to perform regular maintenance on the stone cutting machine.
jack gege -
-
Other -
stone cutting machine
-
270 views -
0 Comments -
0 Likes -
0 Reviews
